زر الباور في iPhone مش بيستجيب أو بيشتغل مرة ومرة، أعمل إيه؟
انزع الجراب أولًا، أعد تشغيل الجهاز، واختبر هل الزر يتحرك طبيعيًا أم عالق. إذا بدأ العطل بعد خبطة أو سائل أو استمر بشكل متقطع فالأفضل فحص الزر والـflex والموصلات بدل افتراض قطعة بعينها.
My iPhone power button is intermittent or unresponsive. What should I check?
Remove the case first, restart the phone, and check whether the button moves normally or feels stuck. If the fault followed impact/liquid or remains intermittent, the button, flex and connectors should be assessed rather than assuming one part.
الاهتزاز أو Haptic في iPhone وقف، هل المشكلة Taptic Engine؟
ليس دائمًا. راجع إعدادات الصوت والـHaptics وأعد التشغيل واختبر الاهتزاز في أكثر من وظيفة. إذا اختفى على مستوى النظام كله واستمر بعد الخطوات الأساسية أو بدأ بعد خبطة/سائل فهنا يلزم فحص الهاردوير.
iPhone vibration or haptics stopped. Is the Taptic Engine necessarily faulty?
Not always. Check sound/haptic settings, restart, and test haptics in more than one system function. If system-wide haptics remain absent or the symptom followed impact/liquid, hardware diagnostics are appropriate.
زرار أو اهتزاز iPhone اتغير بعد سائل، أعمل إيه؟
تعامل معها كحالة سوائل أولًا: افصل الشحن، لا ترش منظفًا ولا تضغط الزر بالقوة، وسجل نوع السائل ووقت التعرض. تغير الأزرار أو الـHaptics بعد السائل قد يحتاج فحص موصلات أو flex أو تآكل داخلي.
An iPhone button or haptic function changed after liquid exposure. What should I do?
Treat it as liquid exposure first: disconnect charging, do not spray cleaner or force the button, and note the liquid/time. Button or haptic changes after liquid may require flex, connector, or corrosion assessment.
زر الصوت في iPhone مش شغال أو زر واحد بس اللي مش بيستجيب، هل لازم يتغير؟
مش بالضرورة. ابدأ بإزالة الجراب وفحص حركة الزر وإعادة التشغيل، ثم افصل بين مشكلة زر ميكانيكي ومشكلة إعدادات أو أثر خبطة/سائل. القرار النهائي يعتمد على الفحص.
One or both iPhone volume buttons are not responding. Does the button need replacement?
Not necessarily. Remove the case, check physical button movement and restart first, then separate a mechanical-button fault from settings or impact/liquid history. The final repair decision depends on diagnostics.
مفتاح الصامت في iPhone مش بيغير الوضع، أبدأ منين؟
اختبره بدون جراب، راقب هل المفتاح يتحرك طبيعيًا، وتأكد من أن المشكلة في المفتاح نفسه وليست في الصوت أو Focus. استمرار العطل أو بدايته بعد خبطة/سائل يحتاج فحصًا.
The iPhone Ring/Silent switch is not changing mode. What should I check first?
Test without a case, check whether the switch moves normally, and confirm the symptom is the switch rather than sound or Focus behavior. Persistent failure or a fault after impact/liquid needs inspection.
الأزرار بقت تعلق أو لا تستجيب بعد ما iPhone وقع، إيه الاحتمالات؟
السقوط قد يؤثر على الفريم أو محاذاة الزر أو الـflex والموصلات الداخلية. لا تضغط الزر بالقوة؛ افحص وجود تشوه في الفريم واطلب فحصًا إذا استمرت المشكلة.
iPhone buttons became stuck or unresponsive after a drop. What could be wrong?
Impact can affect the frame, button alignment, flex cable, or internal connectors. Do not force the button; check for chassis deformation and request inspection if the problem persists.
زر Home شغال لكن Touch ID مش شغال، هل دي نفس المشكلة؟
مش بالضرورة؛ وظيفة Home والاستشعار بالبصمة مساران مختلفان وظيفيًا. جرّب إعدادات وبصمة جديدة، واستمرار فشل Touch ID يحتاج فحصًا.
The Home button works but Touch ID does not. Is that the same fault?
Not necessarily. Home-button input and fingerprint sensing are distinct functions. Try settings and a new fingerprint; persistent Touch ID failure needs assessment.
مش قادر أضيف بصمة جديدة وTouch ID بيقول Failed، أعمل إيه؟
نظف وجفف الحساس والإصبع وأزل أي واقي يغطيه. استمرار Unable to complete Touch ID setup قد يحتاج صيانة.
I cannot enroll a new fingerprint and Touch ID setup fails. What should I do?
Clean and dry the sensor/finger and remove anything covering it. Persistent inability to complete Touch ID setup may require service.